
1 / 3
PSP 608 Multi-Delay Delay Effect
PSP 608 MD is perhaps the most fully featured delay plug-in available on the market. We designed this plugin to offer you a creative tool that is not only functional
but also deeply inspiring.
Each tap has selectable feedback
stereo image and position
delay time
multimode filter
modulation
drive/tape saturation
and reverb. Moreover
the feedback and drive can be placed at the beginning or end of the signal chain for even more sound design options!
The modulation section consists of both an LFO and Envelope follower
and the tape saturation algorithm is taken from our renowned mastering processors. And
of course
all this can be done at any bit depth and sample rate up to 24-bit
192kHz
and be fully automated via MIDI and any host sequencer.
Features:
- Up to 8 seconds of delay time per channel
- Continuous control over the delay time in milliseconds and/or chosen quantize note
- Three operation modes: Multidelay in which each tap has its own feedback buffer; Multitap in which the Master Feedback operates on one (user selectable) tap; and MultiFB where switches the tap off not switch the feedback signal off
- Each tap included independent adjustment of the following: gain stereo field width and balance delay time filtering modulation saturation simulation and reverberation
- Each tap can choose between multiple quadruple biquadratic filter types including: Low Pass Band Pass High Pass PEAK filter and four Shelf filters
- Modulation section (LFO and envelope follower) offer adjustable modulation depth of 3 octaves and can be selected for filter cutoff
- Tape saturation simulation with adjustable gain based on the algorithm used in our mastering processors
- Filtering module in feedback includes LP BP HP filter (either State Variable Filter or Biquad) with adjustable cutoff and resonance
- Vintage reverberation module for faithful simulation of spring and plate reverbs
- Support for sample rates of up to 192kHz
- Host and MIDI automation of all processing
Requirements:
| Platform | CPU | RAM | Disk | Notes | Additional Requirement | Audio Card | Ports | Internet Required | 32 Bit Support | 64 Bit Support | Plugins |
| mac | 0 | 0 | 0 | 1 | 1 | VST-2 AU AAX RTAS | |||||
| windows | 0 | 0 | 0 | 1 | 1 | VST-2 AAX RTAS |
$15,121.00
PSP 608 Multi-Delay Delay Effect—
$15,121.00
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PSP 608 MD is perhaps the most fully featured delay plug-in available on the market. We designed this plugin to offer you a creative tool that is not only functional
but also deeply inspiring.
Each tap has selectable feedback
stereo image and position
delay time
multimode filter
modulation
drive/tape saturation
and reverb. Moreover
the feedback and drive can be placed at the beginning or end of the signal chain for even more sound design options!
The modulation section consists of both an LFO and Envelope follower
and the tape saturation algorithm is taken from our renowned mastering processors. And
of course
all this can be done at any bit depth and sample rate up to 24-bit
192kHz
and be fully automated via MIDI and any host sequencer.
Features:
- Up to 8 seconds of delay time per channel
- Continuous control over the delay time in milliseconds and/or chosen quantize note
- Three operation modes: Multidelay in which each tap has its own feedback buffer; Multitap in which the Master Feedback operates on one (user selectable) tap; and MultiFB where switches the tap off not switch the feedback signal off
- Each tap included independent adjustment of the following: gain stereo field width and balance delay time filtering modulation saturation simulation and reverberation
- Each tap can choose between multiple quadruple biquadratic filter types including: Low Pass Band Pass High Pass PEAK filter and four Shelf filters
- Modulation section (LFO and envelope follower) offer adjustable modulation depth of 3 octaves and can be selected for filter cutoff
- Tape saturation simulation with adjustable gain based on the algorithm used in our mastering processors
- Filtering module in feedback includes LP BP HP filter (either State Variable Filter or Biquad) with adjustable cutoff and resonance
- Vintage reverberation module for faithful simulation of spring and plate reverbs
- Support for sample rates of up to 192kHz
- Host and MIDI automation of all processing
Requirements:
| Platform | CPU | RAM | Disk | Notes | Additional Requirement | Audio Card | Ports | Internet Required | 32 Bit Support | 64 Bit Support | Plugins |
| mac | 0 | 0 | 0 | 1 | 1 | VST-2 AU AAX RTAS | |||||
| windows | 0 | 0 | 0 | 1 | 1 | VST-2 AAX RTAS |














